American-diagnostic-corporation-adc Diagnostix 952B Assembly Bedienungsanleitung PDF herunterladen

DIAGNOSTIX

™

952B

• Wall Mount

Instructions

• Schematics

• Parts List

WALL MOUNTING INSTRUCTIONS

MAINTENANCE

CONNECTING THE INFLATION

SYSTEM TO MANOMETER

Remove red safety cap which seals the

reservoir containing mercury (on the

952, the red safety cap is located on the

air inlet beneath swivel base). Attach

free end of reservoir tube securely to air

inlet. Save red safety cap for later use.

When transporting mercury instrument

we recommend placing the red safety

cap on reservoir.

Please Note: It is normal for negligible

amounts of residual mercury droplets

to accumulate around the air inlet

beneath the red safety cap during trans-

portation.

To Lock Mercury Within the Reservoir: Tilt the entire unit back

45° towards the reservoir to permit mercury to flow out of

cartridge tube and into reservoir. When cartridge tube is

completely emptied of ALL mercury (and while it is still tilted

45°), move locking lever to the right “OFF”. Mercury should be

locked within the reservoir during maintenance or transport. To

release mercury, move lever to “ON” position. If necessary, tilt

unit towards tube to allow mercury to flow out of reservoir.

Lift on the spring loaded EZ-Tube

™

mechanism

located at the top of the instrument. Tilt instrument

forward to free tube. If necessary use a small

flathead screwdriver to help dislodge the top of the

tube. To replace tube, lift EZ-Tube

™

mechanism and

insert base of tube into main unit, being sure

graduation marks face out. Next, position top of

tube and release EZ-Tube

™

mechanism.

To Register Your Product, visit us at www.adctoday.com and follow the links

ADC

55 Commerce Drive

Hauppauge, NY 11788

ADC (UK) Ltd.

Unit 6, PO14 1TH

United Kingdom

tel: 631-273-9600, 1-800-232-2670

fax: 631-273-9659

www.adctoday.com

email: info@adctoday.com

EC REP

Tools Needed

• Medium slotted screwdriver

• Hammer

• Drill with 3/16” drill bit

Wall Mount Instructions

1. Unit may be wall mounted without disassembling main unit from swivel

base/wall mount bracket. Position bracket so that center of unit is

approximately 4’6” from the floor. Using a pencil, mark the holes on either

side of the wall bracket.

2. Check for level and drill 3/16” holes approximately 7/8” deep. Gently tap the 2

screw anchors into the holes until they are flush with the wall.

3. Position the manometer and bracket and mount to the wall using supplied

screws. Take care not to overtighten screws. Position the wall basket as

shown in the illustration at right, approximately 2” to the right of the

manometer.

4. Using a pencil, mark the 3 holes as before. Repeat the procedure for drilling

the holes, inserting anchors, and mounting.

5. Attach 8 foot length of coiled tubing to air inlet underneath mounting bracket.

Insert “male” luer connector on free end of coiled tubing to “female” luer

connector on bladder tubing. Wrap cuff around bulb and store in the basket.

Important: This instrument is designed to permit wall mounting without first

disassembling main unit from its swivel base/mounting bracket.

To remove main unit from bracket, disconnect tubing from mounting bracket.

Unscrew wingnut from bottom of mounting bracket, separating main unit from

bracket. Reverse procedure to reassemble.

1 2

DIAGNOSTIX 1
SCHEMATIC PARTS LIST 2

Inhaltsverzeichnis

Seite 1 - DIAGNOSTIX

DIAGNOSTIX™952B• Wall MountInstructions• Schematics• Parts ListWALL MOUNTING INSTRUCTIONSMAINTENANCECONNECTING THE INFLATIONSYSTEM TO MANOMETERRemove

Seite 2 - SCHEMATIC PARTS LIST

1415A17/W61516187198132123202224252729262830373335343631W32/W12345Ref # Item # Description1 952-101 Butterfly Nut (1)2 952-102 Fitted Washer3 952-103

Kommentare zu diesen Handbüchern

Keine Kommentare

American-diagnostic-corporation-adc Diagnostix 952B Assembly Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Messgeräte American-diagnostic-corporation-adc Diagnostix 952B Assembly herunter. American Diagnostic Corporation (ADC) Diagnostix 952B Assembly User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte American-diagnostic-corporation-adc Diagnostix 952B Assembly